Spiral steel pipe packaging precautions

Views : 3484
Update time : 2023-09-28 09:07:53

  1. If the purchaser has special requirements for the packaging materials and packaging methods of spiral steel pipes, they should be stated in the contract; if not stated, the packaging materials and packaging methods have to be chosen by the supplier.

  2. Packaging materials should comply with relevant regulations. If there is no requirement for packaging materials, they should meet the intended purpose to avoid waste and environmental pollution.

  3. If the customer requires that the spiral steel pipe should not be damaged by bumps or other damage on the surface, you can consider using protective devices between the spiral steel pipes. Protective devices can use rubber, straw rope, fiber cloth, plastic, pipe caps, etc.

  4. Thin-walled spiral steel pipes can be protected by internal supports or external frames due to their thick walls and thin walls. The material of bracket and outer frame are made of the same steel material as the spiral steel pipe.

  5. The state stipulates that spiral steel pipes should be packed in bulk. If the customer requires bundling, it can be considered appropriate, but the diameter must be between 159MM and 500MM. The bundled materials should be packed and fastened with steel belts. Each strip should be twisted into at least two strands and should be appropriately increased according to the outer diameter and weight of the spiral steel pipe to prevent loosening.

  6. If the ends of the spiral steel pipe are threaded, they should be protected by thread protectors. Apply lubricant or anti-rust agent to the thread. The spiral steel pipe has holes at both ends and pipe mouth protectors can be added to both ends according to requirements.

  7. When the spiral steel pipe is put into a container, the container should be paved with soft moisture-proof devices such as textile cloth and straw mats. To prevent the spiral steel pipes from being scattered in the container, they can be bundled or welded with protective brackets on the outside of the spiral steel pipes.

Related News
Read More >>
Global Standards for Boiler Tubes Explained Global Standards for Boiler Tubes Explained
Sep .03.2026
Boiler tubes are mainly used to manufacture superheaters, reheaters, water walls, economizers, etc., for supercritical or ultra-supercritical boilers. The steel tubes are required to have high creep strength, high resistance to oxidation and corrosion, and good structural stability.
How to Choose the Right Seamless Steel Pipe? How to Choose the Right Seamless Steel Pipe?
Sep .01.2026
seamless steel pipe (SMLS Pipe) is a hollow cylindrical section manufactured without any weld seam or joint. Unlike welded pipes, which are formed by rolling steel plate or strip and joining the edges with a weld, seamless pipes are produced from a solid round steel billet that is heated and pierced to create a hollow tube. The absence of a weld seam gives seamless pipes inherent mechanical strength and uniform pressure-bearing capacity across the entire pipe body.
Cold Rolled Seamless Steel Pipe Cold Rolled Seamless Steel Pipe
Aug .27.2026
Cold rolled seamless steel pipe (CRS) is a high-precision tubing product manufactured by cold working hot rolled pipe blanks at room temperature through a cold Pilger rolling mill. Unlike hot rolling, which is performed above the recrystallization temperature, cold rolling is conducted at ambient temperature using compressive rolling forces, resulting in superior dimensional accuracy, smoother surface finish, and enhanced mechanical properties.
What Is The Difference Between Stainless Steel 304 VS 201? What Is The Difference Between Stainless Steel 304 VS 201?
Aug .25.2026
Stainless steel pipe on factory pipes and valves, and in construction site decorative components. 201 and 304. As the two most common austenitic stainless steels, they play irreplaceable roles in their respective fields due to differences in composition and properties.