Our factory have heating furnace two sets

Update time : 2023-02-20 09:08:46

　　Our factory have heating furnace two sets which can produce API 5CT P110 Seamless Carbon Steel Oil Casing Pipe from half inch to 24 inches.

　　Annealing is the workpiece heated to the appropriate temperature, according to the size of the workpiece and workpiece with different holding time, and then slow cooling, the purpose is to achieve or close to the internal balance of metal state, get good performance and performance, or for further quenching Organizational readiness.

　　Normalizing is the workpiece heated to the appropriate temperature in the air cooling, normalizing effect similar to the annealing, but get a more detailed organization, often used to improve the cutting performance of materials, but also sometimes used for some less demanding parts As a final heat treatment.

Previous : Will stainless steel pipe rust?

Next : Cold-drawn seamless steel pipe and hot-rolled seamless steel pipe

Working Pressure of Seamless Steel Pipe

Sep .17.2026

　　Seamless steel pipe actual bearing pressure may be affected by many factors such as the quality of the pipe, processing technology, and use environment Please feel free to contact us if you have any questions Email : pipe@stpipefitting.cn
(SMLS pipe) is a type of pipe produced without welds by deforming the metal as a whole using piercing and rolling techniques. Compared to welded steel pipe, its core advantage stems from the continuity of the material and the uniformity of its structure, providing superior reliability and safety under high pressure, high temperature, and complex stress environments. This makes seamless steel pipe a fundamental and reliable material in the petroleum, chemical, natural gas, and power industries for critical processes and the transportation of hazardous media.

Seamless carbon steel pipe Sch 40

Sep .15.2026

Seamless Carbon Steel Pipe Sch 40 (Schedule 40) is a seamless steel pipe specification that meets the American standard. Its pipe wall thickness is Sch40 (corresponding to the standard wall thickness series), which represents the standard wall thickness under a specific pressure level and is often used in occasions with higher pressure and temperature.

Schedule 80 Carbon Steel Pipe: Thickness, Dimensions & Weight in mm

Sep .10.2026

Schedule 80 Carbon Steel Pipe is made up of carbon steel materials. The carbon steels can vary in composition based on the grades. The strengths and the toughness vary. To have an international and equal identification of the pressure capacities of the pipes, the schedule scale is used. The wall thickness grades of the steel pipe range from Schedule (SCH) 5 to Schedule (SCH) 160. SCH 5 has the lowest pressure resistance, while SCH 160 has the highest.

Steel Pipe Sizes Explained: NPS, OD and Wall Thickness

Sep .08.2026

Steel pipe sizing can be confusing, especially for buyers who are new to piping specifications. A pipe's designated size often differs from its actual dimensions, which can lead to mistakes during purchasing or design.

Have Any Questions?

DON'T HESITATE TO CONTACT US ANY TIME.