Grades：
EN 10217-1 grades: P195TR1, P235TR1, P265TR2 P195TR2, P235TR2, P265TR2
EN10217-2 grades:P195GH,P235GH,P265GH,16Mo3
EN 10217-3 grades:P275NL1,P355N,P355NH,P460N...
EN 10217-4 grades:P215NL,P265NL
EN 10217-5 grades: P235GH,P265GH,16Mo3
EN 10217-6 grades:P215NL,P265NL
EN 10217-7 grades:1.4301(X5CrNi18-10),1.4404(X5CrNiMo17-12-2)...
| Specifications | Range |
| Out Diameter | 33.4mm - 609.6mm |
| Wall Thickness | 3mm - 12mm |
| Steel Grade | Yield strength (Mpa) min | Tensile strength (Mpa) | Elongation (%) min |
| P195TR1 | 195 | 320-440 | 27 |
| P195TR2 | 195 | 320-440 | 27 |
| P235TR1 | 235 | 360-500 | 25 |
| P235TR2 | 235 | 360-500 | 25 |
| P265TR1 | 265 | 410-570 | 21 |
| P265TR2 | 265 | 410-570 | 21 |
| Steel | C | Si | Mn | P | S | Cr | Mo | Ni | Cu | Nb | Ti | V | |
| Grade | Number | max | max | max | max | max | max | max | max | max | max | max | max |
| P195TR1 | 1.0107 | 0.13 | 0.35 | 0.7 | 0.025 | 0.02 | 0.3 | 0.08 | 0.3 | 0.3 | 0.01 | 0.04 | 0.02 |
| P195TR2 | 1.0108 | 0.13 | 0.35 | 0.7 | 0.025 | 0.02 | 0.3 | 0.08 | 0.3 | 0.3 | 0.01 | 0.04 | 0.02 |
| P235TR1 | 1.0254 | 0.16 | 0.35 | 1.2 | 0.025 | 0.02 | 0.3 | 0.08 | 0.3 | 0.3 | 0.01 | 0.04 | 0.02 |
| P235TR2 | 1.0255 | 0.16 | 0.35 | 1.2 | 0.025 | 0.02 | 0.3 | 0.08 | 0.3 | 0.3 | 0.01 | 0.04 | 0.02 |
| P265TR1 | 1.0258 | 0.2 | 0.4 | 1.4 | 0.025 | 0.02 | 0.3 | 0.08 | 0.3 | 0.3 | 0.01 | 0.04 | 0.02 |
| P265TR2 | 1.0259 | 0.2 | 0.4 | 1.4 | 0.025 | 0.02 | 0.3 | 0.08 | 0.3 | 0.3 | 0.01 | 0.04 | 0.02 |
| size in Mm | 5 To 1219.2 |
|---|---|
| Schedule | Schedule XS, Schedule 160, Schedule 40, Schedule XXS, Schedule 80 Supplier and Manufacturer |
| Standard | JIS, EN, DIN, GB, IS, AISI, ASME, ASTM |
| Seamless Pipe Size in MM | 4 to 219 Wall thickness: 0.5 to 20 |
| Welded Pipe Size in MM | 5 to 1219.2 |
| Seamless Tube Size in MM | 3.35 To 101.6 |
| Length | Double Random, Single Random, Standard & Cut length |
| Finish | BA, Polished, AP, MF |
| Form | Square, Hydraulic, Rectangular, Clad, U bent, Boiler, Hollow, LSAW, Straight, Round, |
| Wall Thickness in inch | 0.020 to 0.220 |
| Type | U bent, Straight, Seamless, Round, Welded, EFW, Tube Coil, ERW, Hydraulic, LSAW, Square, Fabricated, Boiler, Rectangular |
| End | Beveled, Plain, Treaded |
| Pipe Marking | All Pipes are marked as follows: Supplier or Manufacturer’s Name, Standard, Grade, OD, Thickness, Length, Heat Number |
En 10217 Pipe is a non – steel alloy that is intended for pressure applications. There are different parts of the same En 10217-1 Pipe specification that have different mechanical and physical properties with varying dimensions.
The Din En 10217-7 Pipe diameters for the efw pipes vary from 5mm to 1219.2mm. The schedules range from sch5 through XXS and heavier.
The En 10217 Welded Pipe is produced by electric resistance welding. The pipe length can vary from single random, double random to custom cut to length sizes.
The En 10217 ERW Pipe can be made with larger diameter. There are different grades under the same specification and they have carbon, silicon, manganese, phosphorus, sulfur, chromium, molybdenum, nickel and nitrogen in the composition.
The 1.4404 En 10217-7 Welded Tube has lower diameters than the pipes. The tubes are used in small fluid flow volumes.
The Inox En 10217-7 Seamless Pipes are used with precise applications as they have higher dimensional accuracies.
The minimum tensile strength of the Din En Iso 10217 Pipes range up to 730MPa and the minimum yield strength up to 235MPa.
The Acero En 10217 Round Pipes are the most commonly used type of pipe where there are square and hydraulic pipes are available.
The Bs En 10217 Hot Rolled Pipes do not require heat treatment to harden them. The preheating or post weld heat treatment methods are also not required for the En 10217 Tc1 Tubes to be welded.
