DIN 2440 Grade St 33-2 Seamless Carbon Steel Pipe

　　DIN 2440 Grade St 33-2 Carbon Steel Seamless Tubes are also known as mild steel pipes and tubes.DIN 2440 Grade St 33-2 Tubes, are low-cost Low Carbon Steel Tubes with – % carbon content with combination of – % manganese easy to form and shape .These pipes are manufactured as per DIN Specification and commercially referred as cs pipes or ms pipes.Low Carbon Steel Pipes are not as hard as hig carbon steel pipes,Though carburizing can increase its surface hardness.

　　Hebei shengtian pipe-fitting group Co., ltd. is considered as the most Reliable DIN 2440 Grade St 33-2 Pipes Supplier from China

The DIN 2440 standard applies to medium-weight tubes suitable for screwing used in applications of medium pressure air and non-hazardous gases. The most common material is St33.2(also known as S185) conforming to DIN 17100. DIN 2440 steel pipes are often supplied in seamless type with zinc coating.

Seamless Steel Tubes DIN 2440 St33-2
The DIN 2440 Grade St 33-2 Round Pipes are the most used ones where the other forms such as square pipes are available. The chemical composition of the pipes contains carbon, silicon, manganese, chromium, nickel and molybdenum.

DIN 2440 ST 33-2 Pipe Specification
Standard  DIN 2440
Grade ST 33-2, ST33-2, ST 33.2
Outside Diameters 32-630mm
Wall Thickness 2.5-75mm
Length any length
Certification DIN 2440 Grade St 33-2 Carbon Steel Seamless Tubes are certified with Mill test Certificate in accordance with En 10204 Type 3.1/3.2. Where 3.2 indicates In-stage inspection by independent inspection agencies like TUV, DNV, BVQS, LLOYDS & EIL.
Testing Requirement IBR, NACE MR 0175,NACE MR 0103, HIC, IGC.
Surface Protection DIN 2440 Grade St 33-2 Tubes are supplied in varnished condition in order to prevent formation of rust.

　　DIN 2440 Grade St 33-2 Seamless Carbon Steel Pipe,DIN 2440 Grade St 33-2 standard applies to seamless tubes including tubes for headers of heat-resistant steels which are used in the construction of boilers, pipe-lines, pressure vessels and equipment for service up to 600″ and at simultaneous high pressures, where the to total stress and the relevant scaling conditions can raise or lower the temperature limit. Our pipe are been supplied in both Plain Square cut,Deburred Ends or Bevelled End. This can be provided with Mill Standard Varnished ,stencilled and bundle Strapped with end caps fitted. Each Bundle is packed according to the customer requirement for export orders.